铝合金自动门的使用与维护

The use and maintenance of aluminum alloy automatic door

(1)门扇地面滑行轨道(下轨道)，必须经常清理垃圾杂物。槽内不得留有异物，以免影响自动门扇的滑行。结冰气候要防止水流进下轨道，以免结冰后卡阻活动门扇。

(1) the ground gliding track (lower track) of the door fan must be often cleaned up. There must be no foreign objects in the slot so as not to affect the sliding of the automatic door fan. The ice weather should prevent the flow of water into the track so as to avoid blocking the active door after freezing.

(2)微波传感器及控制箱等一旦调试正常，就不能任意变动各种旋纽的位置，以免失去其最佳工作状态，达不到应有的技术性能。

(2) microwave sensor and control box once normal debugging, do not arbitrarily change all knob position, so as not to lose its best working condition, not up to the technical performance of the.

(3)铝合金门框、门扇、装饰板等，是经过表面化学防腐蚀氧化处理的，产品运往施工现场后，应妥善保管，并注意门体不得与石灰、水泥及其它酸、碱性化学物品接触，以免损伤表面而影响美观。

(3) Aluminum Alloy door frame and the door leaf and the decorative plates, through surface chemical corrosion oxidation treatment, the product to the construction site, should be kept properly and pay attention to the door body shall not contact with lime, cement and other acid and alkaline chemicals, so as not to damage the surface and affect the appearance.

(4)对使用频繁的自动门，要定期检查传动部分装配紧固零件是否松动、缺损。对机械活动部位定期加油，以保证门扇运行润滑、平稳。

(4) to use frequent automatic doors, check the loosening and defect of the fastening parts regularly. In order to ensure the operation of the door fan to be lubricated and smooth, the mechanical parts of the machine are regularly refueling.